Canon imagePROGRAF iPF6450 Basic Guide - Page 156

iPF6450 Error Messages Before borderless printing, move the blue platen switch 146 Blue platen switch is dirty...146 Borderless printng not possible...140 Calibration There is a problem with the multi-sensor 155 Cannot adjust paper feed...146 Cannot adjust printhead...149 Cannot calibrate...144 Cannot cut paper...139 Cannot detect ink level correctly. Close tank cover 142 Cannot detect papr ...139 Cannot execute this command. Use other paper 144 Cannot feed paper...139 Cannot print as specified...144 Cannot recognize print head x. (x is L, R, or not displayed 150 Check if ink tank is set, and its color and direction 143 Check printed document...146 Clean calibration white tile because it may be dirty 148 Close Ink Tank Cover ...142 Do not pull out ink tank...143 End of paper feed...140 ERROR Exxx-xxxx (x represents a letter or number 154 Excessive temperature or humidity...145 Execute printhead cleaning...150 Error Message File read error...152 GARO Wxxxx (x represents a number) ...154 Hard disk error...152 Hardware error. xxxxxxxx-xxxx (x represents a letter or number 154 Ink insufficient...142 Ink tank is empty...143 Insufficient paper for job ...135 Error Messages Mail box full. Delete unwanted data ...152 Mail box full. Now printing without saving data 152 Mail box nearly full...152 Maint. cart. The level is low ...151 Maintenance cartridge full...151 Maintenance cartridge problem...151 Manual printing is selected, but a roll is loaded 137 Manual printing is selected...137 Maximum jobs stored...152 MediaType Mismatch ...133 Move the blue platen switch No.xx to the right. (xx represents a number 146 Multi-sensor error ...155 No ink left...142 No Maintenance Cartridge capacity...151 No maintenance cartridge...151 No Roll Unit...137 Not much ink is left...143 Paper jam...138 Paper loaded askew...138 Paper mismatch ...133 156 Paper not aligned with right guide...138 Paper size not detected...135 PaprWidth Mismatch ...135 Basic Guide