Canon imagePROGRAF iPF6450 Basic Guide - Page 144

Cannot execute this command. Use other paper. iPF6450 Messages regarding printing or adjustment Cannot execute this command. Use other paper 144 Cannot print as specified...144 Cannot adjust printhead...149 Cannot calibrate...144 Excessive temperature or humidity...145 Please execute common calibration...145 Please commn calibrt using above paper...145 Please calibrate using above paper...145 Before borderless printing, move the blue platen switch 146 Borderless printng not possible...140 Blue platen switch is dirty...146 Move the blue platen switch No.xx to the right. (xx represents a number 146 Cannot adjust paper feed...146 Check printed document...146 Spectrophotometer Unit not connected...146 Spectrophotometer Sensor not mounted...146 Spectrophotometer Unit Calibration white tile error 147 Spectrophotometer Unit eject guide not mounted 147 Spectrophotometer Unit Backing plate error 147 Spectrophotometer up-down unit cover open 147 Spectrophotometer Unit cover open...147 Spectrophotometer read error...147 Clean calibration white tile because it may be dirty 148 Cannot execute this command. Use other paper. Cause Paper compatible with color calibration is not loaded. 1. Press the OK button to clear the error. Corrective Action 2. Load paper that is compatible with color calibration. See the Paper Reference Guide. (See Paper Reference Guide .) Always make sure the loaded paper matches the type of paper in the printer paper settings. Adjustment cannot be completed correctly unless the loaded paper matches the settings. Error Message Messages regarding printing or adjustment Cannot print as specified. Cause The loaded paper is too small. (When you have attempted to print a test print sheet or other printer status information.) Corrective Action Replace the paper with paper of A4/Letter (vertical) size or larger as follows. 1. Press ▲ or ▼ to select Change Paper, press the OK button, and remove the paper. (See "Removing Sheets.") →P.29 2. Switch to paper A4/Letter (vertical) or larger. (See "Loading and Printing on Sheets.") →User's Guide The printer will resume printing. Press ▲ or ▼ to select Stop Printing, and then press the OK button. Cannot calibrate. Cause 144 The paper for printing a test pattern is soiled. Otherwise, you have loaded colored paper. Corrective Action Press the OK button to clear the error. Load unused paper compatible with color calibration. (See Paper Reference Guide .) Basic Guide