Canon imagePROGRAF iPF770 Basics Guide - Page 112
The paper is too small., Replace paper with A4/LTR vertical or larger
View all Canon imagePROGRAF iPF770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
The paper is too small. iPF770 Series Cause When Detect Mismatch in the Control Panel menu is set to Pause, the type of paper loaded does not match the type specified in the printer driver. When Detect Mismatch in the Control Panel menu is set to Warning, the type of paper loaded does not match the type specified in the printer driver. Corrective Action 2. Replace the loaded paper with paper of the type and size you have specified in the printer driver. (See "Loading and Printing on Rolls.") ➔User's Guide (See "Loading and Printing on Sheets.") ➔User's Guide Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However, note that this error may cause paper jams and affect the printing quality. You can continue to print, but note that this error may cause paper jams or problems in the printing results. The paper is too small. Cause When Detect Mismatch in the Control Panel menu is set to Pause, paper smaller than the size specified in the printer driver is loaded. Corrective Action Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However, note that this error may cause paper jams and affect the printing quality. Adjust the paper size setting in the printer driver to match the size loaded in the printer as follows. 1. Press ▲ or ▼ to select Stop Printing, and then press the OK button. 2. Change the paper size setting in the printer driver to the size loaded in the printer and try printing again. Replace the loaded paper with paper of a size that matches the size setting in the printer driver as follows. When Detect Mismatch in the Control Panel menu is set to Warning, paper smaller than the size specified in the printer driver is loaded. 1. Press ▲ or ▼ to select Change Paper, and then press the OK button to stop print- ing. 2. Replace the loaded paper to match the settings in the printer driver and try printing again. (See "Loading and Printing on Rolls.") ➔User's Guide (See "Loading and Printing on Sheets.") ➔User's Guide You can continue to print, but note that this error may cause problems in the printing results. The paper is too small. "Replace paper with A4/LTR (vertical) or larger" Cause Corrective Action The loaded paper is too small. Replace the paper with paper of A4/Letter (vertical) size or larger as follows. 1. Press ▲ or ▼ to select Change Paper, press the OK button, and remove the paper. (See "Removing Sheets.") ➔P.22 2. Switch to paper A4/Letter (vertical) or larger. (See "Loading and Printing on Sheets.") ➔User's Guide The printer will resume printing. Press ▲ or ▼ to select Stop Printing, and then press the OK button. Error Message Messages regarding paper "Replace roll with 10 in. wide or larger roll." Cause Corrective Action 112 The loaded paper is too small. Replace the roll with a roll 10 inches in width or larger as follows. 1. Press ▲ or ▼ to select Change Paper, and then press the OK button. Basic Guide