Canon imagePROGRAF iPF770 Basics Guide - Page 14
Loading Rolls in the Printer, See Cleaning Inside the Top Cover.
View all Canon imagePROGRAF iPF770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Loading Rolls in the Printer 3 With the edge of the roll paper facing forward as shown, insert the Roll Holder from the right of the roll. Insert it firmly until the roll touches the flange (a) of the Roll Holder, leaving no gap. iPF770 Series a Handling Paper Handling rolls 4 Insert the Holder Stopper from the left in the Roll Holder as shown. Holding it at the position shown (b), push it firmly in until the flange (a) of the Holder Stopper touches the roll. Lock the Holder Stopper lever (c) by pushing it down toward the shaft side. c a b Loading Rolls in the Printer Follow these steps to load rolls in the printer. • Before loading rolls, make sure the printer is clean inside the Top Cover and around the Ejection Guide. If these Note areas are dirty, we recommend cleaning them in advance. (See "Cleaning Inside the Top Cover.") ➔P.39 1 Press the Load button. 14 Basic Guide