Canon imagePROGRAF iPF770 Basics Guide - Page 42
Head Cleaning B, Nozzle Check, Tab Selection screen, Set./Adj. Menu, Maintenance, See Menu Settings.
View all Canon imagePROGRAF iPF770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Consumables and Maintenance Cleaning the Printhead iPF770 Series • Head Cleaning B Use this mode if no ink is ejected at all, or if Head Cleaning A does not solve the problem. • Do not remove the Maintenance Cartridge or ink tanks during either Head Cleaning A or Head Cleaning B. Important Ink may leak or an error may occur. • If printing does not improve even if you execute Head Cleaning B, try repeating Head Cleaning B once or twice. If this still does not improve printing, the Printhead may have reached the end of its useful life. Contact your Canon dealer for assistance. • By default, nozzles are checked at fixed intervals. Configure the settings on the Control Panel menu in Nozzle Check. Note (See "Menu Settings.") ➔User's Guide Perform cleaning as follows. 1 On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab ( ). • If the Tab Selection screen is not displayed, press the Menu button. Note 2 Press the OK button. The Set./Adj. Menu is displayed. 3 Press ▲ or ▼ to select Maintenance, and then press the OK button. 4 Press ▲ or ▼ to select Head Cleaning, and then press the OK button. 5 Press ▲ or ▼ to select Head Cleaning A or Head Cleaning B, and then press the OK button. Head cleaning is now executed. 6 Print a test pattern to check the nozzles, and determine whether cleaning has cleared the nozzles. (See "Checking for Nozzle Clogging.") ➔User's Guide Cleaning the Printer 42 Basic Guide