Casio XJ-360 Owners Manual - Page 31
Screen Settings, Signal Settings, Noise Filter, Input Source Specific Menu Items
View all Casio XJ-360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Using the Setup Menu ISignal Settings J Noise Filter This sub-menu provides a choice of noise filter levels to remove digital noise from the projected image when RGB is selected as the input source. Note that the noise filter may not be able to remove certain types of digital noise. z This setting is possible only when RGB is selected as the input source and digital zoom is not being used. The setting is saved for the RGB input source only. z Turning off the projector automatically returns this sub-menu to its initial default setting (Normal). Input Source Specific Menu Items Input Source RGB Component S-VIDEO VIDEO No Signal Available Items (Parentheses indicate defaults.) Low, (Normal), High None ISignal Settings J Restore Menu Defaults This sub-menu returns all of the sub-menu items on the Signal Settings main menu to their initial default settings, except for the phase setting. z This operation is possible only when RGB is selected as the input source and digital zoom is not being used. z "Signal Settings" main menu "Vertical Position", "Horizontal Position", and "Frequency" settings are initialized for the current signal type (XGA/60Hz, SXGA/60Hz, etc.) only. z For details about the initialization procedure, see "To initialize the settings of a particular main menu item" on page 25. Screen Settings IScreen Settings J Keystone Correction This sub-menu lets you correct for vertical keystoning of the projected image. z Vertical keystone correction can be performed regardless of the currently selected input source. z A single setting is stored, which is applied to all input sources. 31