Casio XJ-360 Owners Manual - Page 37

Using the Setup Menu IDetailed Settings J Power On Password, Change Password This sub-menu lets you turn the power on password on and off. While the password is turned on, projector operation is impossible unless the correct password is entered. For more information about the power on password, see "Password Feature" on page 52. Input Source Specific Menu Items Input Source RGB Component S-VIDEO VIDEO No Signal Available Items (Parentheses indicate defaults.) On, (Off) Setting Explanation On: Turns on the power on password, which requires input of a password to turn on the projector. Off: Turns off the password, which allows the projector to be operated without inputting a password. Setting Storage A single setting is stored, which is applied to all input sources. Initial Factory Default Password The following is the 8-key operation you should perform to input the initial factory default password. [S][X][T][W][S][T][W][X] z Note that the projector's password is not really a "word", but rather a series of remote controller key operations. z If you need to keep projector operation secure, be sure to change the initial factory default password to a different one as soon as possible. z The password can be input using the remote controller only. Optimum security is ensured by turning on the password and keeping the remote controller with you. z For information about what you should do if you forget your password, see "If you forget your password..." on page 52. 37