Casio XJ-360 Owners Manual - Page 47
Operational Info, Signal Name, Resolution, Horizontal Frequency, Vertical Frequency, Scan System
View all Casio XJ-360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Using the Setup Menu IOperational Info J Signal Name This sub-menu item shows the signal name of the signal input to the projector. The "Signal Name" column of the table under "Supported Signals" on page 58 shows the signal names that are displayed by this sub-menu item. IOperational Info J Resolution This sub-menu item appears only when RGB is the input signal, and shows the resolution of the RGB input signal in terms of vertical and horizontal pixels. IOperational Info J Horizontal Frequency This sub-menu item appears only when RGB, Component, S-VIDEO, or VIDEO is the input signal. It shows the horizontal frequency of the input signal. IOperational Info J Vertical Frequency This sub-menu item appears only when RGB, Component, S-VIDEO, or VIDEO is the input signal. It shows the vertical frequency of the input signal. IOperational Info J Scan System This sub-menu item appears only when RGB or Component is the input signal, and shows the scanning frequency of the input signal. The input signal is interlace or non-interlace for RGB signal input, and interlace or progressive for Component signal input. IOperational Info J Restore All Defaults This sub-menu returns all of sub-menu items on the setup menu to their initial default settings, except for the power on password on/off setting (Detailed Settings J Power On Password), the password, the language (Detailed Settings J Advanced Settings 2 J Language), and the lamp time (Operational Info J Lamp Time). This operation can be performed regardless of the currently selected input source and regardless of whether or not a signal is currently being input. For details about this initialization procedure, see "To initialize all menu settings" on page 26. IOperational Info J Reset Lamp Time Use this sub-menu item to reset the lamp time to 0 hours. For details about replacing the lamp and the initialization procedure, see "Replacing the Lamp" in the separate "User's Guide (Basic Operations)". 47