Cisco 3524XL Hardware Installation Guide - Page 65
Attaching the Brackets to the Switch
UPC - 746320224220
View all Cisco 3524XL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Chapter 2 Installing and Starting Up the Switch Installing the Switch in a Rack Attaching the Brackets to the Switch The bracket orientation and the screws you use depend on whether you are attaching the brackets for a 19-inch or a 24-inch rack. Use two of the supplied screws to attach each bracket, according to the following guidelines: • For a 19-inch rack, use the supplied number-8 Phillips flat-head screws to attach the long side of the bracket to the switch. • For a 24-inch rack, use the supplied number-8 Phillips truss-head screws to attach the short side of the bracket to the switch. Figure 2-3 and Figure 2-4 show how to attach a bracket to one side of the switch. Follow the same steps to attach the second bracket to the opposite side. Figure 2-3 Attaching Brackets for 19- and 24-Inch Racks (Front Panel Forward) Phillips flat-head screws Phillips truss-head screws 22437 1 SYSTEM RPS MODE STATUS UTIL DUPLX SPEED 19" Configuration 2 3 1 SYSTEM RPS MODE STATUS UTIL DUPLX SPEED 2 3 24" Configuration 22438 78-6456-03 Catalyst 3500 Series XL Hardware Installation Guide 2-9