Cisco 3524XL Hardware Installation Guide - Page 75
Connecting to the GBIC Module Ports
UPC - 746320224220
View all Cisco 3524XL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Chapter 2 Installing and Starting Up the Switch Connecting to the GBIC Module Ports Connecting to the GBIC Module Ports Note Install the Gigabit Interface Converters (GBICs) as described in the "GBIC Module Slots" section on page 1-10, and then connect to the 1000BaseX ports. For detailed instructions on installing, removing, and cabling the GBICs (1000BaseSX module or the 1000BaseLX/LH module), refer to the GBIC documentation. For detailed instructions on installing and cabling the GigaStack GBICs, see the Catalyst GigaStack Gigabit Interface Converter Hardware Installation Guide. Connecting to a 1000BaseX GBIC Module Port Caution Do not remove the rubber plugs from the fiber-optic port or the rubber caps from the fiber-optic cable until you are ready to connect the cable. The plugs and caps protect the fiber-optic port and cable from contamination and ambient light. 78-6456-03 Catalyst 3500 Series XL Hardware Installation Guide 2-19