Cisco 3845 Message Guide - Page 24

EC Messages Chapter 2 Messages and Recovery Procedures Error Message EC-5-CANNOT_BUNDLE1: Port-channel [chars] is down, port [chars] will remain stand-alone. Explanation The aggregation port is down. The port remains standalone until the aggregation port is up. The first [chars] is the EtherChannel, and the second [chars] is the port number. Recommended Action Ensure that the other ports in the bundle have the same configuration. Error Message EC-5-CANNOT_BUNDLE2: [chars] is not compatible with [chars] and will be suspended ([chars]). Explanation The interface has different interface attributes than other ports in the EtherChannel. For the interface to join the bundle (EtherChannel), change the interface attributes to match the EtherChannel attributes. The first [chars] is the interface to be bundled, the second [chars] is the physical interface (a switch port or a routed port) that is already in the bundle, and the third [chars] is the reason for the incompatibility. Recommended Action Change the interface attributes to match the EtherChannel attributes. Error Message EC-5-CANNOT_BUNDLE_LACP: [chars] is not compatible with aggregators in channel [dec] and cannot attach to them ([chars]). Explanation The port has different port attributes than the port channel or ports within the port channel. The first [chars] is the incompatible port, [dec] is the channel group number, and the last [chars] is the reason. Recommended Action For the port to join the bundle, change the port attributes so that they match the port. Error Message EC-5-COMPATIBLE: [chars] is compatible with port-channel members. Explanation A port was not operational because its attributes were different from those of the port channel or ports within the port channel. The system has detected that the attributes of the port now match the port-channel attributes. [chars] is the affected port. Recommended Action No action is required. Error Message EC-5-DONTBNDL: [chars] suspended: incompatible remote port with [chars] Explanation The configuration of the remote port is different from the configuration of other remote ports in the bundle. A port can only join the bundle when the configuration of the local port and the configuration of the remote port are the same as other ports already in the bundle. The first [chars] is the name of the local interface that is being suspended, and the second [chars] is the name of the local interface that is already bundled. Recommended Action Make sure that the configuration of the remote ports is the same for all ports in the bundle. 2-10 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL-23408-01