Cisco 3845 Message Guide - Page 45
PLATFORM_ENV Messages - power supply part number
UPC - 746320981420
View all Cisco 3845 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Chapter 2 Messages and Recovery Procedures PLATFORM_ENV Messages PLATFORM_ENV Messages Error Message PLATFORM_ENV-1-FRU_PS_SIGNAL_FAULTY: [chars] signal on power supply [dec] is faulty Explanation The specified power supply signal is faulty. [chars] is the input or output signal value, and [dec] is the power supply number. Recommended Action No action is required. Error Message PLATFORM_ENV-1-FRU_PS_SIGNAL_OK: [chars] signal on power supply [dec] is restored Explanation The specified power supply signal is restored. [chars] is the input or output signal value, and [dec] is the power supply number. Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to look for similar reported problems. If you still need assistance, open a case with the TAC, or provide your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. Error Message PLATFORM_ENV-3-ENV_INIT_FAIL: Environmental Driver Initialization Error Explanation The environmental (pSoC) driver did not initialize. The switch cannot determine the system, voltage rail, thermal, and fan status. Recommended Action If the message appears again, upgrade the firmware or replace the driver. Error Message PLATFORM_ENV-3-GLUE_INIT_FAIL: Hardware Tracking Driver Initialization Error Explanation The hardware tracking (control field-programmable gate array (FPGA)) driver did not initialize. The switch cannot determine the field-replaceable unit (FRU) power supply, small form-factor pluggable (SFP) module, FPGA, serial peripheral interface (SPI), Joint Test Action Group (JTAG), and alarm status Recommended Action If the message appears again, replace the control FPGA. OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-31