Cisco 3845 Message Guide - Page 41
MAC_MOVE Messages, PAGP_DUAL_ACTIVE Messages
![]() |
UPC - 746320981420
View all Cisco 3845 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Chapter 2 Messages and Recovery Procedures MAC_MOVE Messages Error Message MAC_LIMIT-4-ENFORCE: Enforcing limit on Vlan [dec] with Configured limit = [dec]. Explanation The number of MAC address entries for the VLAN exceeds the maximum number allowed. The configured action is to limit the number of entries to the maximum allowed. The first [dec] is the VLAN ID, and the second [dec] is the maximum number of MAC address entries. Recommended Action Contact your system administrator to configure this action. Error Message MAC_LIMIT-4-EXCEED: Vlan [dec] with Configured limit = [dec] has currently [dec] Entries. Explanation The number of MAC address entries for a VLAN exceeds the maximum number allowed. The first [dec] is the VLAN ID, the second [dec] is the maximum number of MAC address entries, and the third [dec] is the number of entries in the MAC address table. Recommended Action Contact your system administrator to configure this action. MAC_MOVE Messages Error Message MAC_MOVE-4-NOTIF: Host [enet] in vlan [dec] is flapping between port [chars] and port [chars]. Explanation The host is moving between the specified ports. [enet] is the Ethernet address of the host, [dec] is the VLAN ID, the first [chars] is the first port, and the second [chars] is the second port. Recommended Action Check your network for loops. PAGP_DUAL_ACTIVE Messages Error Message PAGP_DUAL_ACTIVE-3-OBJECT_CREATE_FAILED: Unable to create [chars] Explanation The switch cannot create the specified managed object. [chars] is the object name. Recommended Action No action is required. Error Message PAGP_DUAL_ACTIVE-3-RECOVERY_TRIGGER: PAgP running on [chars] informing virtual switches of dual-active: new active id [enet], old id [enet] Explanation PAgP received a new active ID on the specified interface, which means that all virtual switches are in a dual-active scenario. The interface is informing virtual switches of this, which causes one switch to go into recovery mode. [chars] is the interface, the first [enet] is the new active ID, and the second [enet] is the ID that it replaces. Recommended Action No action is required. OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-27
![](/manual_guide/products/cisco-3845-message-guide-8b81c11/41.png)