Cisco 3845 Message Guide - Page 26
desirable, channel-group, mode on, no shutdown, port to activate unshut the aggregation port.
UPC - 746320981420
View all Cisco 3845 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
EC Messages Chapter 2 Messages and Recovery Procedures Error Message EC-5-NOPAGP: Invalid EC mode, PAgP not enabled. Explanation PAgP is not included in the Cisco IOS image and that the EtherChannel mode cannot be set to desirable or auto. Recommended Action Obtain an image with PAgP included, or set the mode to on by using the channel-group channel-group-number mode on interface configuration command. Error Message EC-5-PORTDOWN: Shutting down [chars] as its port-channel is admin-down. Explanation The administrative state of the port is controlled by the administrative state of its aggregate port. If the administrative state of the aggregate port is down, the administrative state of the port is also forced to be down. [chars] is the physical interface. Recommended Action Enter the no shutdown interface configuration command on the aggregate port to activate the aggregation port. Error Message EC-5-STAYDOWN: [chars] will remain down as its port-channel [chars] is admin-down. Explanation The administrative state of the aggregation port overrides that of the affected port. If the aggregation port is administratively down, all ports in the aggregation port are forced to be administratively down. The first [chars] is the physical interface, and the second [chars] is the EtherChannel. Recommended Action Enter the no shutdown interface configuration command on the aggregation port to activate (unshut) the aggregation port. Error Message EC-5-STAYDOWN: no-shut not allowed on [chars]. Module [dec] not online. Explanation An interface with an EtherChannel configuration cannot be enabled by using the no shutdown interface configuration command because it is a member of an EtherChannel group and that EtherChannel group has been administratively shut down. The interface has an EtherChannel configuration, but no information is available yet about its port channel. [chars] is the interface, and [dec] is the module. Recommended Action No action is required. Wait until the module is online to find out the port-channel setting of the EtherChannel. Error Message EC-5-UNBUNDLE: Interface [chars] left the port-channel [chars]. Explanation The listed interface left the specified EtherChannel. The first [chars] is the physical interface, which can be a switch port or a routed port, and the second [chars] is the EtherChannel. Recommended Action No action is required. 2-12 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL-23408-01