Cisco SGE2000 Software Configuration Guide - Page 20

Fabric Extender Image Management, Licensing Requirements for the Fabric Extender, Guidelines

Get Cisco SGE2000 PDF manuals and user guides View all Cisco SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Fabric Extender Image Management Overview The chassis ID ranges from 101 to 199. Note The chassis ID is required only to access a host interface on the Fabric Extender. A value of less than 101 indicates a slot on the parent switch. The following port numbering convention is used for the interfaces on the switch: interface ethernet slot/port • slot identifies the slot number on the Fabric Extender. • port identifies the port number on a specific slot and chassis ID. Fabric Extender Image Management No software ships with the Cisco Nexus 2000 Series Fabric Extender. The Fabric Extender image is bundled into the system image of the parent switch. The image is automatically verified and updated (if required) during the association process between the parent switch and the Fabric Extender. When you enter the install all command, it upgrades the software on the parent Cisco Nexus Series switch and also upgrades the software on any attached Fabric Extender. To minimize downtime as much as possible, the Fabric Extender remains online while the installation process loads its new software image. Once the software image has successfully loaded, the parent switch and the Fabric Extender both automatically reboot. This process is required to maintain version compatibility between the parent switch and the Fabric Extender. Licensing Requirements for the Fabric Extender The following table shows the licensing requirements for the Cisco Nexus 2000 Series Fabric Extender: Product Cisco NX-OS License Requirement The Cisco Nexus 2000 Series Fabric Extender requires no license. Any feature not included in a license package is bundled with the Cisco NX-OS system images and is provided at no extra charge to you. For an explanation of the licensing scheme, see the Cisco NX-OS Licensing Configuration Guide. Guidelines and Limitations The Cisco Nexus 2000 Series Fabric Extender has the following configuration guidelines and limitations: • Beginning with Cisco NX-OS Release 5.2(1), the default port mode is Layer 3. Before Cisco NX-OS Release 5.2(1), the default port mode was Layer 2. Cisco Nexus 2000 Series NX-OS Fabric Extender Software Configuration Guide 10 OL-25816-02

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
The chassis ID ranges from 101 to 199.
The chassis ID is required only to access a host interface on the Fabric Extender. A
value of less than 101 indicates a slot on the parent switch. The following port numbering
convention is used for the interfaces on the switch:
interface ethernet
slot
/
port
Note
•
slot
identifies the slot number on the Fabric Extender.
•
port
identifies the port number on a specific slot and chassis ID.
Fabric Extender Image Management
No software ships with the Cisco Nexus 2000 Series Fabric Extender. The Fabric Extender image is bundled
into the system image of the parent switch. The image is automatically verified and updated (if required)
during the association process between the parent switch and the Fabric Extender.
When you enter the
install all
command, it upgrades the software on the parent Cisco Nexus Series switch
and also upgrades the software on any attached Fabric Extender. To minimize downtime as much as possible,
the Fabric Extender remains online while the installation process loads its new software image. Once the
software image has successfully loaded, the parent switch and the Fabric Extender both automatically reboot.
This process is required to maintain version compatibility between the parent switch and the Fabric Extender.
Licensing Requirements for the Fabric Extender
The following table shows the licensing requirements for the Cisco Nexus 2000 Series Fabric Extender:
License Requirement
Product
The Cisco Nexus 2000 Series Fabric Extender
requires no license. Any feature not included in a
license package is bundled with the Cisco NX-OS
system images and is provided at no extra charge to
you. For an explanation of the licensing scheme, see
the
Cisco NX-OS Licensing Configuration Guide
.
Cisco NX-OS
Guidelines and Limitations
The Cisco Nexus 2000 Series Fabric Extender has the following configuration guidelines and limitations:
• Beginning with Cisco NX-OS Release 5.2(1), the default port mode is Layer 3. Before Cisco NX-OS
Release 5.2(1), the default port mode was Layer 2.
Cisco Nexus 2000 Series NX-OS Fabric Extender Software Configuration Guide
10
OL-25816-02
Overview
Fabric Extender Image Management