Cisco SGE2000 Software Configuration Guide - Page 32
Before You Begin, SUMMARY STEPS, DETAILED STEPS, Purpose, Command or Action, Step 1 - serial settings
![]() |
View all Cisco SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Configuring Fabric Extender Global Features Configuring the Fabric Extender Before You Begin Ensure that you have enabled the Fabric Extender feature set. Ensure that you are in the correct VDC (or use the switchto vdc command). SUMMARY STEPS 1. configure terminal 2. fex FEX-number 3. (Optional) description desc 4. (Optional) no description 5. (Optional) type FEX-type 6. (Optional) no type 7. (Optional) serial serial 8. (Optional) no serial DETAILED STEPS Step 1 Step 2 Step 3 Step 4 Step 5 Command or Action configure terminal Purpose Enters configuration mode. Example: switch# configure terminal switch(config)# fex FEX-number Enters configuration mode for the specified Fabric Extender. The range of the FEX-number is from 101 to 199. Example: switch(config)# fex 101 switch(config-fex)# description desc Example: switch(config-fex)# description Rack7A-N2K (Optional) Specifies the description. The default is the string FEXxxxx where xxxx is the FEX-number. If the FEX-number is 123, the description is FEX0123. no description (Optional) Deletes the description. Example: switch(config-fex)# no description type FEX-type (Optional) Specifies the type of Fabric Extender. FEX-type is one of the following: Example: switch(config-fex)# type N2248T • N2224TP-24 100Base-T/1000Base-T Ethernet host interfaces and 2 10-Gigabit SFP+ Ethernet fabric interfaces module • N2232P and N2232TM-32 10-Gigabit SFP+ Ethernet host interfaces and 8 10-Gigabit SFP+ Ethernet fabric interfaces module Cisco Nexus 2000 Series NX-OS Fabric Extender Software Configuration Guide 22 OL-25816-02
![](/manual_guide/products/cisco-slm2024tna-software-configuration-guide-784ac94/32.png)