Cisco SGE2000 Software Configuration Guide - Page 33
Configuration Examples, Purpose, Command or Action, Step 6 - save configuration
![]() |
View all Cisco SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Configuring the Fabric Extender Configuration Examples Step 6 Step 7 Step 8 Command or Action no type Example: switch(config-fex)# no type serial serial Example: switch(config-fex)# serial JAF1339BDSK no serial Example: switch(config-fex)# no serial Purpose • N2248T and N2248TP-E-48 100Base-T/1000Base-T Ethernet host interfaces and 4 10-Gigabit SFP+ Ethernet fabric interfaces module. The parent Cisco Nexus Series device remembers the type of the Fabric Extender in its binary configuration. When this feature is configured, the Fabric Extender is only allowed to come online if its type matches the configured FEX-type. (Optional) Deletes the FEX type. When a Fabric Extender is connected to the fabric interfaces and does not match the configured type saved in the binary configuration on the parent switch, all configurations for all interfaces on the Fabric Extender are deleted. (Optional) Defines a serial number string. If this command is configured, a switch only allows the corresponding chassis ID to associate (using the fex associate command) if the Fabric Extender reports a matching serial number string. Caution Configuring a serial number that does not match the specified Fabric Extender forces the Fabric Extender offline. (Optional) Deletes the serial number string. Configuration Examples This section contains examples of FEX configurations. OL-25816-02 Cisco Nexus 2000 Series NX-OS Fabric Extender Software Configuration Guide 23
![](/manual_guide/products/cisco-slm2024tna-software-configuration-guide-784ac94/33.png)