Compaq 222863-001 TaskSmart W2200 Administration Guide - Page 32
Step 3: Eth0 Network Information, Friendly Name
![]() |
View all Compaq 222863-001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
2-14 Compaq TaskSmart W2200 Appliance Server Administration Guide Step 3: Eth0 Network Information Step 3 requests Eth0 network information and is shown in Figure 2-3. Figure 2-3. Rapid Startup Step 3: Eth0 Network Information screen In the dialog box of Step 3, provide the following information: 1. Select the check box to enable Eth0, or deselect the check box to disable Eth0. 2. In the Friendly Name text box, type a name for Eth0. 3. For Mode, use the option buttons to select one of the following modes: a. Static b. DHCP c. BOOTP IMPORTANT: A static IP address is required for at least one of the Ethernet interfaces. You must log in again to the new IP address to regain access. If the client utility is still running, restart the search after you finish Rapid Startup to find the appliance at its new address.
![](/manual_guide/products/compaq-222863001-tasksmart-w2200-administration-guide-2aa1ff1/32.png)