Compaq ProLiant 400 ProLiant ML330 Setup and Installation Guide - Page 38
Slide the drive compartment back into the chassis.
![]() |
View all Compaq ProLiant 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Hardware Options Installation 3-9 6. Slide the drive into the drive bay, then secure with two screws on either side of the drive compartment. 2 2 1 Figure 3-7. Installing a 3.5-inch hard drive 7. Slide the drive compartment back into the chassis. 8. Connect the power and data cables to the back of all devices. Figure 3-8. Connecting the hard drive cables 9. Replace the access panel and the front bezel. 10. Restore power to the server. NOTE: Using a non-Ultra2 drive impacts SCSI bus performance.
![](/manual_guide/products/compaq-proliant-400-proliant-ml330-setup-installation-guide-7446882/38.png)
Hardware Options Installation
3-9
6.
Slide the drive
into the drive bay, then secure with two screws
on
either side of the drive compartment.
1
2
2
Figure 3-7.
Installing a 3.5-inch hard drive
7.
Slide the drive compartment back into the chassis.
8.
Connect the power and data cables to the back of all devices.
Figure 3-8.
Connecting the hard drive cables
9.
Replace the access panel and the front bezel.
10.
Restore power to the server.
NOTE:
Using a non-Ultra2 drive impacts SCSI bus performance.