Compaq ProLiant 400 ProLiant ML330 Setup and Installation Guide - Page 49
Memory Modules, Technical Information and Important Guidelines for DIMM Installation
View all Compaq ProLiant 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
3-20 Compaq ProLiant ML330 Setup and Installation Guide Memory Modules Technical Information and Important Guidelines for DIMM Installation CAUTION: Before removing the access panel, make sure that the server is powered down, all cables are disconnected from the back of the server, and the power cord is disconnected from the grounded AC outlet. CAUTION: To prevent damage to the system when handling components, see Appendix B, "Electrostatic Discharge." CAUTION: When handling a memory module, be careful not to touch any of the contacts. Doing so may damage the module. When installing DIMMs, you must follow these guidelines: Use only 64-MB, 128-MB, 256-MB, or 512-MB registered PC133-MHz ECC SDRAM DIMMs. DIMMs must be industry-standard, 168-pin, PC133-MHz registered SDRAM DIMMs. The SDRAM DIMMs must support CAS Latency 3 (CL=3). Do not mix ECC and non-ECC SDRAM DIMMs. If different types of DIMMs are mixed, the system does not function properly.