Compaq ProLiant 400 ProLiant ML330 Setup and Installation Guide - Page 74

5-10 Compaq ProLiant ML330 Setup and Installation Guide Installing Survey Installing Survey with SmartStart Installation To install the Compaq Survey Utility through the SmartStart Setup process, refer to the SmartStart Installation Poster. This method installs an operating system and Compaq products on a server. Do not use this method to add the Compaq Survey Utility to an existing system. Installing Survey from Compaq Management CD To install the Compaq Survey Utility from the Compaq Management CD on a Windows NT server, you must be logged on to the Windows NT server with administrator access rights. Once you are logged on, enter the following at the Windows NT command prompt: [CD-ROM DRIVE]:\Survey\Win-NT\Eng\Survey -i -c If the target server does not have a CD drive, use Diskette Builder to create Survey Utility diskettes. To install the Compaq Survey Utility from the Compaq Management CD on a NetWare server, enter the following at the NetWare system prompt: Load [CD-ROM DRIVE]:\Survey\Netware\Eng\Sinstall Running Survey Once the Compaq Survey Utility is installed, it gathers information by default every Wednesday at noon and at every power-up. You can change the Compaq Survey Utility data-gathering interval using command line parameters. You can also force a one-time, immediate collection. If you want the Compaq Survey Utility to perform a one-time immediate collection on a Windows NT server, enter the following at the Windows NT command prompt: Survey If you want the Compaq Survey Utility to perform a one-time immediate collection on a NetWare server you need to unload the utility, then reload it. Enter the following at the NetWare system prompt: Unload Survey At the next NetWare system prompt, enter the following: Load Survey You can also change the Compaq Survey Utility data-gathering interval using command line parameters.