Compaq ProLiant 400 ProLiant ML330 Setup and Installation Guide - Page 60
Identifying and Connecting a Fast SCSI 2 Device (Narrow), Feature Board.
View all Compaq ProLiant 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
4-4 Compaq ProLiant ML330 Setup and Installation Guide Identifying and Connecting a Fast SCSI-2 Device (Narrow) Some SCSI devices require a special adapter, which is not standard with your server, to connect with the SCSI cable included with your server. Figure 4-3. 68-to-50 pin (wide-to-narrow) SCSI adapter If you are installing a device that uses a Fast SCSI-2 interface, you must use a 68-to-50 pin SCSI adapter (part number 199618-001), shown in Figure 4-3. This adapter should be installed between the 50-pin interface on the device and the 68-pin SCSI cable attached to the SCSI connector on the Server Feature Board.
4-4
Compaq ProLiant ML330 Setup and Installation Guide
Identifying and Connecting a
Fast SCSI-2 Device (Narrow)
Some SCSI devices require a special adapter, which is not standard with your
server, to connect with the SCSI cable included with your server.
Figure 4-3.
68-to-50 pin (wide-to-narrow) SCSI adapter
If you are installing a device that uses a Fast SCSI-2 interface, you must use a
68-to-50 pin SCSI adapter (part number 199618-001), shown in Figure 4-3.
This adapter should be installed between the 50-pin interface on the device and
the 68-pin SCSI cable attached to the SCSI connector on the Server
Feature Board.