D-Link DFL-1100 Product Manual - Page 17
WAN Interface Settings - Using PPPoE
UPC - 790069270239
View all D-Link DFL-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
WAN Interface Settings - Using PPPoE Use the following procedure to configure the DFL-1100 external interface to use PPPoE (Point-to-Point Protocol over Ethernet). This configuration is required if your ISP uses PPPoE to assign the IP address of the external interface. You will have to fill in the username and password provided to you by your ISP. • Username - The login or username supplied to you by your ISP. • Password - The password supplied to you by your ISP. • Service Name - When using PPPoE some ISPs require you to fill in a Service Name. • Primary and Secondary DNS Server - The IP addresses of your DNS servers; these are optional and are often provided by the PPPoE service.
WAN Interface Settings – Using PPPoE
Use the following procedure to
configure
the
DFL-1100
external
interface to use PPPoE (Point-to-Point
Protocol
over
Ethernet).
This
configuration is required if your ISP
uses PPPoE to assign the IP address
of the external interface. You will have
to fill in the username and password
provided to you by your ISP.
•
Username
– The login or
username supplied to you
by your ISP.
•
Password
–
The
password supplied to you by your ISP.
•
Service Name
– When using PPPoE some ISPs require you to fill in a Service
Name.
•
Primary and Secondary DNS Server
– The IP addresses of your DNS servers;
these are optional and are often provided by the PPPoE service.