D-Link DFL-1100 Product Manual - Page 58
L2TP/PPTP Servers
UPC - 790069270239
View all D-Link DFL-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
L2TP/PPTP Servers Settings for L2TP/PPTP Server Configuration Name - Specifies a name for this PPTP/L2TP Server. Outer IP - Specifies the IP that the PPTP/L2TP server should listen on, leave it Blank for the WAN IP. Inner IP - Specifies the internal IP of the VPN tunnel. Leave this field Blank for the LAN IP. IP Pool and settings - Information related to client IP assignment. Client IP Pool - An IP range, group or entire network that the PPTP/L2TP Server will use as an IP address pool to assign dynamic IP addresses to clients. Primary/Secondary DNS - IP addresses of the primary and secondary DNS servers. If utilizing the DNS Relay function, be sure to enable the check box to ensure proper DNS info. Primary/Secondary WINS - IP of the Windows Internet Name Service (WINS) servers that are used in Microsoft environments which uses the NetBIOS Name Servers (NBNS) to assign IP addresses to NetBIOS names. Authentication protocol - Specify which authentication protocol to use, if any (not necessary). Refer to the Authentication Protocols section for more information about each type. MPPE encryption - If MPPE encryption is to be used, select the desired level of encryption key (MPPE is used with PPTP). A selection of None means that data will be sent over the PPP link unencrypted. Require IPSec encryption - If configuring for L2TP, you most likely will be using IPSec instead of MPPE for data encryption. To use IPSec enable the checkbox and select PSK or Certificate. 58