D-Link DFL-1100 Product Manual - Page 87
Settings for Main office
![]() |
UPC - 790069270239
View all D-Link DFL-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Settings for Main office 1. Setup interfaces, System->Interfaces: WAN IP: 194.0.2.20 LAN IP: 192.168.1.1, Subnet mask: 255.255.255.0 2. Setup IPSec tunnel, Firewall->VPN: Under IPSec tunnels click add new Name the tunnel ToBranchOffice Local net: 192.168.1.0/24 PSK: 1234567890 (Note! You should use a key that is hard to guess) Retype PSK: 1234567890 Select Tunnel type: LAN-to-LAN tunnel Remote Net: 192.168.4.0/24 Remote Gateway: 194.0.2.10 Enable "Automatically add a route for the remote network" Click Apply
![](/manual_guide/products/dlink-dfl1100-product-manual-7ad74b3/87.png)
Settings for Main office
1.
Setup interfaces,
System->Interfaces
:
WAN IP:
194.0.2.20
LAN IP:
192.168.1.1
, Subnet mask:
255.255.255.0
2.
Setup IPSec tunnel,
Firewall->VPN:
Under IPSec tunnels click
add new
Name the tunnel
ToBranchOffice
Local net:
192.168.1.0/24
PSK:
1234567890
(Note! You should use a key that is hard to guess)
Retype PSK:
1234567890
Select Tunnel type:
LAN-to-LAN tunnel
Remote Net:
192.168.4.0/24
Remote Gateway:
194.0.2.10
Enable “Automatically add a route for the remote network”
Click
Apply