D-Link DFL-1100 Product Manual - Page 9
LEDs & Physical Connections - d link dfl
![]() |
UPC - 790069270239
View all D-Link DFL-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
LEDs & Physical Connections Power: A solid light indicates a proper connection to the power supply. Status: A System status indicator that flashes occasionally to indicate a functional, active system. Solid illumination of the Status LED indicates a hardware/software critical failure. WAN, LAN, DMZ, & ETH4: Bright Green illumination indicates a valid Ethernet Link on that respective port. Each LED will flicker when that respective port is sending or receiving data. COM Port: Serial Read-Only access to the firewall software from a PC equipped with a Serial COM port (9600 baud, 8 data bits, No Parity, 1 Stop bit, No Flow Control). WAN Port: Use this port to connect to an external network, such as a WAN or a modem provided by an ISP. LAN Port: Use this port to connect to a Fast Ethernet Switch to service more than 1 client PC on the internal office network. DMZ Port: Use this port to service an additional physically segmented Private or Transparent Network to be occupied by WAN accessible servers (FTP, HTTP, DNS). DC Power (on rear of unit): Use the included PC power cable to connect to an 110/120VAC electrical receptacle. Do not use more than 110/120VAC to power the device, doing so will damage the unit. Power Switch (on rear of unit): Use the Power switch to turn the DFL-1100 off and on.
![](/manual_guide/products/dlink-dfl1100-product-manual-7ad74b3/9.png)