D-Link DGS-3208F Product Manual - Page 124

Network Classes Class A, B, C for Subnet Mask, 33 Network loop detection and prevention Spanning Tree Algorithm, 15 Network Monitoring, 61 New Password, 30, 110 New Root, 13 Normal User, 12 Old Password, 30, 110 Operating Temperature, 113 out-of-band management, 79 Out-of-Band Management, 12 Oversize Frames, 65, 103 Overview, 100, 105 Overview of this User's Guide, v Packet Forwarding, 14 Parity, 79 Path Cost, 83 Path Cost, 16 PC to Switch, 10 % of Utilization, 100 % Utilization, 64 %Util., 63 Performance features, 2 Performing a System Reset, 69 Ping Test, 58 Port, 42, 65, 67 Port (1-8), 36 Port Mirroring Configuration, 37 Port Priority, 16, 18 Port Priority, 16 Port type settings Console, 34 Out-of-Band, 34 Port-Based VLANs, 22 Ports, 64 Ports Setup, 74 Power Consumption, 113 Power Failure, 6 Power LED indicator, 8 Power on, 5 Prevent Unauthorized Users, 26 Priority, 36, 40, 75, 83 PROM Firmware Version, 72 Protocol Parameters Bridge Forward Delay field, 39 Bridge Hello Time field, 39 Bridge Max Age field, 39 Rack Installation, 5 RAM Buffer, 114 RE-232 DCE console port, 2 Read-only MIBs, Definition of, 14 Read-write MIBs, Definition of, 14 Rear Panel, 7 Received Bad Fragments, 103 Gigabit Ethernet Switch User's Guide Repetition, 59 Resetting the Switch, 69 Rising Action, 37 RMON MIB (RFC 1757), 3 RMON probe, 38, 76 Root Bridge, 15 Root C, 39 Root Cost, 82 Root Path Cost, 15 Root Port, 16, 39, 82 Root Priority, 39 Root Priority(Sec), 82 Routers, 2 RS-232 DCE console port, 12 Runtime Software Version, 72 RX (good), 104 RX (GOOD), 66 RX frames/sec, 100 RX Octets, 66 RX/sec, 63 Save Configuration, 28 Segments, Network, 1 Send Bootp Request Upon Power Up, 73 Serial Port, 34, 79 Setting Up The Switch, 31 Setup, 4 Side Panels, 8 SLIP, 79 SLIP interface out-of-band communication, 32 SLIP management, 34, 79 sniffer, 38, 76 SNMP Community String, 61 SNMP Configuration, 60 Software Update Mode, 57, 78 Source Port, 37 Spanning Tree Algorithm (STA), 15 Spanning Tree Algorithm (STA), Function of the, 12 Spanning Tree Algorithm Parameters, 38 Protocol Parameters, 38 Spanning Tree Protocol, 39, 81, 83 Spanning Tree Protocol (STP), 39, 81, 82 Speed, 64 Speed/Duplex, 75 STA Operation Levels, 15 On the Bridge Level, 15 Standard MIB-II, 14 State, 36 Static filtering, 14 Static Filtering, definition of, 42 Status, 61 Steps to Create Administrator or Normal User Access, 27 Stop Bits, 79 Storage Temperature, 113 Store and forward switching, 2 STP Parameters Setting, 38 117