D-Link DGS-3208F Product Manual - Page 41
Con Switch, Con Advanced Switch Features
UPC - 790069222092
View all D-Link DGS-3208F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Gigabit Ethernet Switch User's Guide ♦ Serial Port Determines whether the serial port should be used for out-of-band (SLIP) management or for console management, starting from the next time the Switch is restarted. In this field, you can toggle between SLIP or Console port type settings. ♦ Baud Rate Determines the serial port bit rate that will be used the next time the Switch is restarted. Applies only when the serial port is being used for out-of-band (SLIP) management; it does not apply when the port is used for the console port. Available speeds are 2400, 9600, 19200 and 38400 bits per second. The default setting in this Switch version is 9600. Configure Switch The Switch Configuration screen shows various pieces of information about your Switch, and allows you to set the System Name, System Location, and System Contact. These settings can be retrieved from the Switch using SNMP requests, allowing the settings to be used for network management purposes. Choose Configure Switch to access the second item on the System Configuration menu. The following screen appears: Figure 6-11. Switch Configuration screen The fields you can set are: ♦ System Name Corresponds to the SNMP MIB II variable system.sysName, and is used to give a name to the Switch for administrative purposes. The Switch's fully qualified domain name is often used, provided a name has been assigned. ♦ System Location Corresponds to the SNMP MIB II variable system.sysLocation, and is used to indicate the physical location of the Switch for administrative purposes. ♦ System Contact Corresponds to the SNMP MIB II variable sysContact, and is used to give the name and contact information for the person responsible for administering the Switch. The Configure Advanced Switch Features screen allows you to enable or disable head of line blocking prevention. Press ADVANCE SETTINGS on the System Configuration window to access the Configure Advanced Switch Features screen: 34