D-Link DGS-3208F Product Manual - Page 54
Con VLAN, Con MAC-based Broadcast Domains, Add/Remove MAC-based Broadcast Domain Members
UPC - 790069222092
View all D-Link DGS-3208F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Gigabit Ethernet Switch User's Guide After you have set the age-out timer and either enabled or disabled IGMP status for the desired VLAN, press APPLY to let the changes take effect. Configure VLAN The VLAN Configuration menu displays the status of the current VLAN mode and allows a user to restart the Switch in IEEE 802.1Q VLANs, Port-based, or MAC-based Broadcast Domains mode, or not to use a selection by choosing None. Please note that the Switch can only support one mode at any given time. Also, each time the mode is changed, the Switch must be rebooted before the new mode is activated. If you have selected MAC-based Broadcast Domains and then rebooted the Switch, Configure MAC-based Broadcast Domains will appear at the bottom of the VLAN Configuration screen (System Configuration ! Configure VLANs): Figure 6-27. VLAN Configuration screen The information on the top of the screen is described as follows: ♦ Current VLAN Mode Displays what mode, if any, is currently enabled on the Switch. ♦ Restart VLAN Mode Choose from four settings for this mode: MAC-based Broadcast Domains, IEEE 802.1Q VLANs, Port-based, or None. After being restarted, the Switch will implement the setting you have chosen. Configure MAC-based Broadcast Domains To create MAC-based broadcast domains, simply create the broadcast domain itself in the Add/Remove MAC-based Broadcast Domains screen, and then enter MAC addresses to the broadcast domain in the Add/Remove MAC-based Broadcast Domain Members screen. Afterwards, restart the Switch and the broadcast domain will be implemented. Please note that if the mode is set to MAC-based Broadcast Domains, then the Port Lock function is not supported in the Port Configuration screen and the Lock Address Table function located on the Configure Filtering and Forwarding Table screen is not available. Choose Configure MAC-based Broadcast Domains from the bottom of the VLAN Configuration screen above to access the MAC-Based Broadcast Domains Configuration menu: 47