D-Link DNS-320L DNS-320L Manual - Page 152

Section 4 - Configuration Application Management FTP server The Application Management section allows you to configure many services for your DNS-320L. The server and service settings include: FTP server, UPnP AV server, iTunes server, AFP, and NFS services. Let's begin by looking at configuration options for the FTP server. Max User: Set the maximum amount of users that can connect to the FTP server. Idle Time: Set the amount of time a user can remain idle before being disconnected. Port: Set the FTP port. Default is 21. If you are behind a router, you will need to forward the FTP port from the router to the device. Additional filtering and firewall settings may need to be modified on your router to allow FTP Access to the device from the Internet. Once the port has been forwarded on the router, users from the Internet will access the FTP server through the WAN IP address of the router. Passive Mode: In situations where the device is behind a firewall and unable to accept incoming TCP connections, passive mode must be used. Client Language: Most standard FTP clients likeWindows FTP, only supportWestern European code page when transferring files. Support has been added for non standard FTP clients that are capable of supporting these character sets. Flow Control: Allow you to limit the amount of bandwidth available for each user. SSL/TLS: Here the user can enable the SSL/TLS connection only. FXP: Enable or Disable File eXhange Protocol to transfer files from one FTP server to another. Note: In order to use FXP (File Exchange Protocol) for server-to-server data transfer, make sure to change the port from 21 to some other port as listed in the Port section of the Web UI. Also, make sure to open the corresponding port on your router and forward that port from your router to the device. D-Link ShareCenter DNS-320L User Manual 148