D-Link DSM 330 User Guide - Page 14
Advanced Network Setup - mac
UPC - 790069313424
View all D-Link DSM 330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
DivX Connected User Guide DivX Connected User Guide S Key Authentication This Setting Enables This Authentication Method Open Key identification occurs via a wireless adapter's MAC address. It is the default key authentication method. * Shared authentication is not supported. Key Length This Setting 64 bit 128 bit Establishes This Encryption Key Length This is the original length of an encrypted key, consisting of a 40-bit key and 24 bits of system information. A more secure encryption key length with 88 additional bits. Advanced Network Setup This section discusses advanced network topics, including ad-hoc networking, static IP addressing and power line networking. Joining a Network That Is Not Broadcasting Its SSID In the event your network does not broadcast an SSID, you may still join with DivX Connected by following these steps. Choose 'Setup' on the remote control. Then go to Network > Configure Wireless. Be sure that you have wireless enabled, and then choose 'Add Network'. From there, you should be able to input your SSID using the letters and characters on the screen. After you input your SSID, choose 'Enter', and the device will attempt to connect to the SSID. If your router requires an encryption key, you will be prompted to input your key in the same manner. 10 Copyright © 2007, DivX, Inc., Confidential