Dell A940 All In One Personal Printer Owner's Manual - Page 27
exits the printer., Transparencies
View all Dell A940 All In One Personal Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
You can load up to: Make sure: 100 sheets of plain paper The paper is designed for use with inkjet printers. 10 envelopes • The envelopes are loaded vertically against the right side of the paper support. • The stamp location is in the upper left corner. • The envelopes are designed for use with inkjet printers. • You squeeze and slide the paper guide to the left edge of the envelope (as shown). NOTE: To avoid smearing ink, remove each transparency or photo from the paper exit tray before the next one exits the printer. Transparencies and photos may require up to 15 minutes to dry. 25 sheets of labels The labels are designed for use with inkjet printers. 10 sheets of card stock • The card stock is designed for use with inkjet printers. • The thickness does not exceed 0.025 inches. 10 greeting cards, index The cards are loaded vertically against the right side of cards, postcards, or the paper support. photo cards 25 sheets of coated, The glossy or coated side faces you. photo, or glossy paper 10 transparencies • The transparencies are designed for use with inkjet printers. • The rough side faces you. 100 sheets of custom size Your paper size fits within these dimensions: paper Width Length - 76 to 216 mm - 127 to 432 mm - 3.0 to 8.5 in. - 5.0 to 17.0 in. 25 iron-on transfers • You follow the loading instructions on the iron-on packaging. • The blank side faces you. 20 sheets of banner paper The banner paper is designed for use with inkjet printers. Using your printer 15