Dell Alienware 15 R4 Service Manual - Page 11
Removing the base cover, Procedure
View all Dell Alienware 15 R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Removing the base cover WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Remove the six screws (M2.5x13) that secure the base cover to the computer base. 2 Loosen the captive screw that secures the base cover to the computer base to open a gap between the two parts. 3 Using a plastic scribe, gently pry the base cover from the gap around the captive screw to release the clips on the base cover from the computer base. 11