Dell Alienware 15 R4 Service Manual - Page 28
Removing the computer base, Prerequisites, Procedure
View all Dell Alienware 15 R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Removing the computer base WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Follow the procedure from step 1 to step 3 in "Removing the hard drive". 3 Remove the solid-state drive. 4 Remove the wireless card. 5 Remove the rear-I/O cover. Procedure 1 Note the antenna cables routing and remove the antenna cables from the routing guides on the computer base. 2 Disconnect the left and right tron-light cables from the system board. 3 Remove the two screws (M2x3) that secure the tron-light holder to the palm-rest assembly. 28