Dell Alienware 15 R4 Service Manual - Page 27
Replacing the rear-I/O cover, Procedure, Post-requisites
View all Dell Alienware 15 R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Replacing the rear-I/O cover WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Align the tabs on the rear-I/O cover with the slots on the computer base and snap the rear-I/O cover into place. 2 Replace the two screws (M2.5x7) that secure the rear-I/O cover to the palm-rest assembly. Post-requisites Replace the base cover. 27
Replacing the rear-I/O cover
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
Before working inside your computer
. After working inside your computer, follow the instructions
in
After working inside your computer
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
.
Procedure
1
Align the tabs on the rear-I/O cover with the slots on the computer base and snap the rear-I/O cover into place.
2
Replace the two screws (M2.5x7) that secure the rear-I/O cover to the palm-rest assembly.
Post-requisites
Replace the
base cover
.
27