Dell Alienware 15 R4 Service Manual - Page 69
Removing the display assembly, Prerequisites, Procedure
View all Dell Alienware 15 R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Removing the display assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the wireless card. 3 Follow the procedure from step 1 to step 3 in "Removing the hard drive". 4 Remove the solid-state drive. 5 Remove the rear-I/O cover. 6 Remove the computer base. 7 Remove the battery. 8 Remove the memory modules. 9 Follow the procedure from step 1 to step 21 in "Removing the system board". Procedure 1 Carefully pull the antenna cables out from the gap between the system board and the palm-rest assembly. 2 Turn the computer over. 3 Disconnect the logo-board cable from the system board. 4 Peel the tape to access the display cable. 69