Dell B1165nfw Dell Users Guide - Page 163

Wireless network setup If the IP address assignment method is DHCP, check if DHCP is shown in the Confirm Wireless Network Settings window. If it shows Static, click Change TCP/IP to change the assignment method to Receive IP address automatically (DHCP). • Use static address If the IP address assignment method is Static, check if Static is shown in the Confirm Wireless Network Settings window. If it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine. For example: If the computer's network information is as shown follows: - IP address: 169.254.133.42 - Subnet Mask: 255.255.0.0 Then, the machine's network information should be as below: - IP address: 169.254.133.43 - Subnet Mask: 255.255.0.0 (Use the computer's subnet mask.) - Gateway: 169.254.133.1 10 When the wireless network settings are completed, disconnect the USB cable between the computer and machine. Click Next. 11 Click Next when the Install Printer Driver window appears. 12 Select the components to be installed. Click Next. 13 After selecting the components, you can also change the machine name, set the machine to be shared on the network, set the machine as the default machine, and change the port name of each machine. Click Next. 14 After the installation is finished, a window asking you to print a test page appears. If you want to print a test page, click Print a test page. Otherwise, just click Next and go to step 16. 15 If the test page prints out correctly, click Yes. If not, click No to reprint it. 16 Click Finish. 13 Setup using Mac Items to prepare • Access point • Network-connected computer • Software CD that was provided with your machine • A machine installed with a wireless network interface • USB cable 2. Using a Network-Connected Machine 163