Dell Dimension 4550 Dell Dimension 4550 Owner's Manual - Page 63
Start, Boot to Utility Partition, IDE CD-ROM Device, Boot from CD-ROM, Run the 32 Bit Dell
View all Dell Dimension 4550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Starting the Dell Diagnostics From Your Hard Drive 1 Shut down and restart the computer. 2 When the DELL™ logo appears, press immediately. If you wait too long and the Microsoft® Windows® logo appears, continue to wait until you see the Windows desktop. Then shut down your computer through the Start menu and try again. 3 When the boot device list appears, highlight Boot to Utility Partition and press . 4 When the Dell Diagnostics Main Menu appears, select the test you want to run (see page 64). Starting the Dell Diagnostics From the ResourceCD 1 Insert the ResourceCD into the CD drive. 2 Shut down and restart the computer. When the DELL™ logo appears, press immediately. If you wait too long and the Windows logo appears, continue to wait until you see the Windows desktop. Then shut down your computer through the Start menu and try again. 3 When the boot device list appears, highlight IDE CD-ROM Device and press . 4 Select the IDE CD-ROM Device option from the CD boot menu. 5 Select the Boot from CD-ROM option from the menu that appears. 6 Type 1 to start the ResourceCD menu. 7 Type 2 to start the Dell Diagnostics. 8 Select Run the 32 Bit Dell Diagnostics from the numbered list. If multiple versions are listed, select the version appropriate for your platform. 9 When the Dell Diagnostics Main Menu appears, select the test you want to run (see page 64). HINT: If you receive a message stating that no Diagnostics utility partition has been found, follow the instructions to run the Dell Diagnostics from your ResourceCD (see page 63). HINT: This procedure changes the boot sequence for one time only. On the next start-up, the computer boots according to the devices specified in the system setup program. Advanced Troubleshooting 63