Dell Dimension 9100 Owner's Manual - Page 47
green and then turn off after the system, All four diagnostic lights display solid
View all Dell Dimension 9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Light Pattern Problem Description Suggested Resolution A possible expansion card failure has occurred. 1 Determine if a conflict exists by removing a card (not a graphics card) and restarting the computer (see page 68). 2 If the problem persists, reinstall the card that you removed, remove a different card, and then restart the computer. 3 Repeat this process for each card. If the computer starts normally, troubleshoot the last card removed from the computer for resource conflicts (see page 51). 4 If the problem persists, contact Dell (see page 119). Another failure has occurred. • Ensure that the cables are properly connected to the system board from the hard drive, CD drive, and DVD drive (see page 63). • If there is an error message on your screen identifying a problem with a device (such as the floppy drive or hard drive), check the device to ensure that it is functioning properly. • The operating system is attempting to boot from a device (such as the floppy drive or hard drive); check system setup (see page 107) to make sure the boot sequence is correct for the devices installed on your computer. • If the problem persists, contact Dell (see page 119). All four diagnostic lights display solid green and then turn off after the system successfully boots to the operating system. None. Troubleshooting Tools 47