Dell Dimension 9100 Owner's Manual - Page 96
Remove the Media Card Reader from its packaging and ensure that all four screws are
View all Dell Dimension 9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
www.dell.com | support.dell.com NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface on the computer chassis. 1 Follow the procedures in "Before You Begin" on page 55. Media Card Reader screws (4) 2 Lay the computer on its side so that the system board is on the bottom of the inside of the computer. 3 Remove the computer cover (see page 60). 4 Remove the drive panel (see page 82). 5 Remove the Media Card Reader from its packaging and ensure that all four screws are included.. 6 Gently slide the drive into place until you feel a click or feel the drive securely installed. Ensure that the Media Card Reader is installed before the FlexBay cable is connected. 7 Connect the FlexBay USB cable to the back of the Media Card Reader and to the Media Card Reader connector on the system board (see page 63). 96 Removing and Installing Parts