Dell Dimension 9100 Owner's Manual - Page 66
Installing Memory
View all Dell Dimension 9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
www.dell.com | support.dell.com Installing Memory CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface on the computer. 1 Follow the procedures in "Before You Begin" on page 55. 2 Remove the computer cover (see page 60). 3 Lay the computer on its side so that the system board is on the bottom of the inside of the computer. 4 Press out the securing clip at each end of the memory module connector. memory connector closest to processor securing clips (2) connector 5 Align the notch on the bottom of the module with the crossbar in the connector. notch memory module cutouts (2) crossbar 66 Removing and Installing Parts