Dell Dimension 9100 Owner's Manual - Page 93
Installing a Floppy Drive, Media Card Reader, Removing a Media Card Reader
View all Dell Dimension 9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Installing a Floppy Drive 1 If you are installing a new floppy drive, remove the shoulder screws from the inside of the drive-panel insert and attach the screws to the new drive. floppy drive shoulder screws (4) 2 Slide the floppy drive into the floppy drive bay until the sliding plate clicks into place and the drive snaps into position. 3 Attach the power and floppy-drive cables to the floppy drive. 4 For more information on system board, see "System Board Components" on page 63. 5 Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents. 6 Close the computer cover. NOTICE: To connect a network cable, first plug the cable in to the network wall jack and then plug it in to the computer. 7 Connect your computer and devices to their electrical outlets, and turn them on. See the documentation that came with the floppy drive for instructions on installing any software required for the operation of the drive. 8 Enter system setup (see page 108) and select the appropriate Diskette Drive option. 9 Verify that your computer works correctly by running the Dell Diagnostics (see page 48). Media Card Reader For information on using the Media Card Reader, see "Using a Media Card Reader (Optional)" on page 20. Removing a Media Card Reader CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. Removing and Installing Parts 93