Dell Force10 S4820T Installing the S4820T System - Page 27
Four-post Threaded Configuration, For each rail
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Four-post Threaded Configuration 1 For this configuration, you must remove the flange ear castings from each end of the ReadyRails assemblies. Use a Torx driver to remove the two screws from each flange ear and remove each casting. Refer to Figure 4-4, step 1. Retain the castings for future rack requirements. 2 For each rail, attach the front and rear flanges to the post flanges with two user-supplied screws at each end. Refer to Figure 4-4, step 2. Figure 4-4. Four-post Threaded Configuration Installing the S4820T | 27
Installing the S4820T
|
27
Four-post Threaded Configuration
1
For this configuration, you must remove the flange ear castings from each end of the ReadyRails
assemblies. Use a Torx driver to remove the two screws from each flange ear and remove each
casting. Refer to
Figure 4-4
, step 1. Retain the castings for future rack requirements.
2
For each rail, attach the front and rear flanges to the post flanges with two user-supplied screws at
each end. Refer to
Figure 4-4
, step 2.
Figure 4-4.
Four-post Threaded Configuration