Dell Force10 S55T S55 Configuration Guide FTOS 8.3.5.3 - Page 262

www.dell.com | support.dell.com Step Command Syntax 6 no disable Command Mode CONFIG-FRRP Set FRRP Timers Purpose Enable this FRRP group on this switch. Step Command Syntax 1 timer {hello-interval|dead-interval} milliseconds Command Mode Purpose CONFIG-FRRP Enter the desired intervals for Hello-Interval or Dead-Interval times. Hello-Interval: 50-2000, in increments of 50 (default is 500) Dead-Interval: 50-6000, in increments of 50 (default is 1500) The Dead-Interval time should be set at 3x the Hello-Interval. Clear FRRP counters Use one of the following commands to clear the FRRP counters. Command Syntax clear frrp ring-id clear frrp Command Mode Purpose EXEC PRIVELEGED Clear the counters associated with this Ring ID Ring ID: 1-255 EXEC PRIVELEGED Clear the counters associated with all FRRP groups Show FRRP configuration Use the following command to view the configuration for the FRRP group. Command Syntax show configuration Command Mode CONFIG-FRRP Purpose Show the configuration for this FRRP group Show FRRP information Use one of the following commands show general FRRP information. Command Syntax show frrp ring-id Command Mode EXEC or EXEC PRIVELEGED Purpose Show the information for the identified FRRP group. Ring ID: 1-255 262 | Dell Force10 Resilient Ring Protocol