Dell Force10 S55T S55 Configuration Guide FTOS 8.3.5.3 - Page 753

Set the time and date for the switch software clock You can change the order of the month and day parameters to enter the time and date as time day month year. You cannot delete the software clock. The software clock runs only when the software is up. The clock restarts, based on the hardware clock, when the switch reboots. Command Syntax clock set time month day year Command Mode EXEC Privilege Purpose Set the system software clock to the current time and date. time: Enter the time in hours:minutes:seconds. For the hour variable, use the 24-hour format, for example, 17:15:00 is 5:15 pm. month: Enter the name of one of the 12 months in English. You can enter the name of a day to change the order of the display to time day month year. day: Enter the number of the day. Range: 1 to 31. You can enter the name of a month to change the order of the display to time day month year year: Enter a four-digit number as the year. Range: 1993 to 2035. Force10#clock set 16:20:00 19 september 2009 Force10# System Time and Date | 753