Dell Inspiron 16 Plus 7640 Owners Manual - Page 103
System-diagnostic lights
View all Dell Inspiron 16 Plus 7640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
System-diagnostic lights This section lists the system-diagnostic lights of your Inspiron 16 Plus 7640. Table 46. System-diagnostic lights Blinking pattern Amber 1 White 1 1 2 1 3 1 4 1 5 1 6 1 7 2 1 2 2 2 3 2 4 2 5 2 6 2 7 2 8 3 2 3 3 3 4 3 5 3 6 3 7 4 1 4 2 Problem description TPM detection failure Unrecoverable SPI flash failure Short in hinge cable tripped OCP1 Short in hinge cable tripped OCP2 EC unable to program i-Fuse EC internal failure Non-RPMC Flash on boot guard fused system Processor failure System board: BIOS or ROM (Read-Only Memory) failure No memory or RAM (Random-Access Memory) detected Memory or RAM (Random-Access Memory) failure Memory or RAM (Random-Access Memory) failure System-board or chipset error Display failure - SBIOS message Display failure - EC detection of power rail failure PCI of video card/chip failure BIOS recovery image not found BIOS recovery image found but invalid Power-rail failure System BIOS Flash corruption. Management Engine (ME) error Memory or RAM (Random-Access Memory) failure Processor failure NOTE: Blinking pattern 3-3-3 on Lock LED (Caps-Lock or Num-Lock), Power button LED (without Fingerprint reader), and Diagnostic LED indicates failure to provide input during LCD panel test on the "Dell SupportAssist Pre-boot System Performance Check" diagnostics. Camera status light: Indicates whether the camera is in use. ● Solid white-Camera is in use. ● Off-Camera is not in use. Caps Lock status light: Indicates whether Caps Lock is enabled or disabled. Troubleshooting 103