Dell Inspiron 16 Plus 7640 Owners Manual - Page 50

Battery cable, Removing the 64 Wh battery cable

Get Dell Inspiron 16 Plus 7640 PDF manuals and user guides View all Dell Inspiron 16 Plus 7640 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

Figure 24. Installing the 6-cell battery (90 Wh) Steps 1. Place the battery on the palm-rest and keyoard assembly. 2. Align the screw holes on the 6-cell battery (90 Wh) with the screw holes on the palm-rest and keyboard assembly. 3. Replace the six screws (M2x3.5) that secure the 6-cell battery (90 Wh) to the palm-rest and keyboard assembly. 4. Connect the 6-cell battery cable to its connector on the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Battery cable Removing the 64 Wh battery cable CAUTION: The information in this section is intended for authorized service technicians only. Prerequisites 1. Follow the procedure in Before working inside your computer. NOTE: Ensure that your computer is in Service Mode. For more information, see step 6 in Before working inside your computer. 2. Remove the base cover. 3. Remove the 4-cell battery (64 Wh) or 6-cell battery (90 Wh), whichever is applicable. About this task The following images indicate the location of the 64 Wh battery cable and provide a visual representation of the removal procedure. 50 Removing and installing Field Replaceable Units (FRUs)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
Figure 24. Installing the 6-cell battery (90 Wh)
Steps
1.
Place the battery on the palm-rest and keyoard assembly.
2.
Align the screw holes on the 6-cell battery (90 Wh) with the screw holes on the palm-rest and keyboard assembly.
3.
Replace the six screws (M2x3.5) that secure the 6-cell battery (90 Wh) to the palm-rest and keyboard assembly.
4.
Connect the 6-cell battery cable to its connector on the system board.
Next steps
1.
Install the
base cover
.
2.
Follow the procedure in
After working inside your computer
.
Battery cable
Removing the 64 Wh battery cable
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
NOTE:
Ensure that your computer is in Service Mode. For more information, see
step 6
in
Before working inside your
computer
.
2.
Remove the
base cover
.
3.
Remove the
4-cell battery (64 Wh)
or
6-cell battery (90 Wh)
, whichever is applicable.
About this task
The following images indicate the location of the 64 Wh battery cable and provide a visual representation of the removal
procedure.
50
Removing and installing Field Replaceable Units (FRUs)