Dell Inspiron 16 Plus 7640 Owners Manual - Page 48
Removing the 6-cell battery (90 Wh), Installing the 4-cell battery 64 Wh
View all Dell Inspiron 16 Plus 7640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Figure 22. Installing the 4-cell battery (64 Wh) Steps 1. Place the battery on the palm-rest and keyoard assembly. 2. Align the screw holes on the 4-cell battery (64 Wh) with the screw holes on the palm-rest and keyboard assembly. 3. Replace the four screws (M2x3.5) that secure the 4-cell battery (64 Wh) to the palm-rest and keyboard assembly. 4. Connect the 4-cell battery cable to its connector on the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Removing the 6-cell battery (90 Wh) CAUTION: The information in this section is intended for authorized service technicians only. Prerequisites 1. Follow the procedure in Before working inside your computer. NOTE: Ensure that your computer is in Service Mode. For more information, see step 6 in Before working inside your computer. 2. Remove the base cover. About this task The following image(s) indicate the location of the 6-cell battery (90 Wh) and provides a visual representation of the removal procedure. NOTE: Depending on the configuration of your computer, the computer ships with either a 6-cell battery (90 Wh) or a 4-cell battery (64 Wh). 48 Removing and installing Field Replaceable Units (FRUs)