Dell Inspiron 16 Plus 7640 Owners Manual - Page 40
Fan, Removing the fan
View all Dell Inspiron 16 Plus 7640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Your M.2 2230 is mounted on a 2230-specific thermal shield. ● M.2 2280 solid-state drive and a 2280-specific thermal shield. The following image(s) indicate the location of the M.2 2280 solid-state drive and provides a visual representation of the installation procedure. Figure 16. Installing the M.2 2280 solid-state drive Steps 1. Align the notch on the M.2 2280 solid-state drive with the tab on the M.2 solid-state drive slot on the system board. 2. Slide the M.2 2280 solid-state drive into the M.2 solid-state drive slot on the system board. 3. Place the M.2 2280 thermal shield on the M.2 2280 solid-state drive. 4. Replace the screw (M2x3) that secures the M.2 2280 solid-state drive and M.2 2280 thermal shield to the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Fan Removing the fan Prerequisites 1. Follow the procedure in Before working inside your computer. NOTE: Ensure that your computer is in Service Mode. For more information, see step 6 in Before working inside your computer. 2. Remove the base cover. About this task The following image(s) indicate the location of the left fan and provides a visual representation of the removal procedure. 40 Removing and installing Customer Replaceable Units (CRUs)