Dell Inspiron 16 Plus 7640 Owners Manual - Page 36
Solid-state drive, Removing the M.2 2230 solid-state drive
View all Dell Inspiron 16 Plus 7640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Figure 12. Installing the base cover 2 Steps 1. Place the base cover on the palm-rest and keyboard assembly. 2. Press on the sides of the base cover to snap it into place. 3. Tighten the two captive screws (M2x8.6) that secure the base cover to the palm-rest and keyboard assembly. 4. Replace the six screws (M2x4) that secure the base cover to the palm-rest and keyboard assembly. Next steps 1. Follow the procedure in After working inside your computer. Solid-state drive Removing the M.2 2230 solid-state drive Prerequisites 1. Follow the procedure in Before working inside your computer. NOTE: Ensure that your computer is in Service Mode. For more information, see step 6 in Before working inside your computer. 2. Remove the base cover. About this task NOTE: This procedure applies only to computers shipped with an M.2 2230 solid-state drive installed. 36 Removing and installing Customer Replaceable Units (CRUs)